
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-10S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 15 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X25-10S is a double-acting compact cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop from 15 to 25 mm on-site. The short riveted body minimizes axial mounting depth where round-body or profile variants will not fit.
This unit includes a built-in piston magnet for AirTAC reed or electronic switches. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 25 mm |
| Adjustable range | 15 – 25 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 15 to 25 mm extend stop during prototype runs to find the optimal contact point before locking the M6 screw.
Quickly re-set the push distance for different package sizes on a sorting line without changing out the entire cylinder body.
Operators needing on-machine stroke tuning can turn the R thread screw to shorten the extend position without shims.
Confirm your requirements for the 20 mm bore, 25 mm maximum stroke, 10 mm adjust window, M5x0.8 port, female M4x0.7 rod thread, and the -S magnet option. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and the adjuster acts as a mechanical stop, not a lock. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 adjuster screw shortens the extend endpoint by up to 10 mm, giving a usable 15 to 25 mm range. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.