verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-20

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-20 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 5 to 25 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke25 mm
  • Adjustable range5–25 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$28.14 $35.64Save 21% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-20

The AirTAC SDAJ20X25-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the forward end-position between 5 and 25 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains full length.

The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; adding the -S option enables sensing.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-20 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-20
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke25 mm
Adjustable range5 – 25 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-20

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×25Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-20 Is Used

precision_manufacturing

Trial Positioning Pins

Dial the M6 screw to find the exact 5-25 mm extend depth for locating pins during short-run prototyping before locking the final position.

straighten

Light Press Fitments

Press small bearings or dowels to a precise intermediate depth without part changes, relying on the fixed NBR bumper to absorb the end shock.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-20 the Right Cylinder?

Choose this unit when your fixture requires on-site stroke tuning between 5 and 25 mm.

Confirm your parameters: 20 mm bore, 25 mm max stroke, 20 mm adjust window, M5x0.8 port, female M4x0.7 rod thread, and no magnet. Operating speed spans 30-500 mm/s. A plain cylinder does not hold a load if air pressure drops or the valve centres; the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–25 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-20 FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

Turning the R (M6x1.0) screw shortens the extend stroke by up to 20 mm, yielding a usable forward range of 5 to 25 mm. The screw sets the mechanical stop and does not alter force or lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X25-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.