
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X35-20 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X35-20 is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke down by 20 mm directly at the machine, yielding a usable extend range of 15 to 35 mm without swapping shims or parts. Retract remains full length.
The short riveted body saves valuable axial mounting depth where round-body or profile alternatives will not fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; choose the -S variant if position sensing is required.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X35-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 15-35 mm extend stop during prototype runs to find the exact 94 N safe working contact point without machining new spacers.
Set precise mechanical end positions for thin-metal bending fixtures where the fixed NBR bumper absorbs the 8 kg vertical lift impact.
Stepping down to SDAJ16 yields 100.5 N, whereas stepping up to SDAJ25 provides 245.4 N.
Select this model for setup-heavy lines requiring frequent on-machine stroke tuning within the 15-35 mm window. Confirm your parameters: 20 mm bore, 35 mm max stroke, 20 mm adjust window, M5x0.8 port, female M4x0.7 rod thread, and no magnet. Remember that a plain cylinder drifts when air is lost or the valve centres; the fixed bumper only decelerates near the end and the R screw is a stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa. Operating pressure spans 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.
Turning the R (M6x1.0) screw shortens the extend stroke by up to 20 mm, giving an outward travel range of 15 to 35 mm. The screw acts strictly as a mechanical stop and does not alter force. It cannot hold a load mid-stroke if air pressure drops; use an external rod lock for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.