
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X35-20S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X35-20S is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop precisely between 15 and 35 mm. The short riveted body drastically reduces axial mounting depth, fitting into tight machine envelopes where longer alternatives cannot.
Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches mounted directly into the body sensor grooves. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock without the complexity of an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X35-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 15-35 mm extend stop during prototype runs to find the optimal contact point before locking down the final mechanical setup.
Rapidly reconfigure the extend endpoint for product family changeovers without swapping out the entire cylinder body or adding shims.
Choose this specific model if your assembly process requires frequent on-machine stroke tuning between 15 and 35 mm without changing hardware.
Confirm the 20 mm bore, 35 mm maximum stroke, 20 mm adjustment window, and M5x0.8 port. The -S code indicates the magnet is present for position sensing, and the rod end features a female M4x0.7 thread. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel and the R screw acts as a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
It operates at speeds of 30-500 mm/s and accepts a maximum pressure of 1.0 MPa.
Turning the R (M6x1.0) adjuster screw shortens the extend stroke by up to 20 mm, yielding a usable range of 15-35 mm. The included -S piston magnet works with AirTAC reed or electronic solid-state switches fitted into the body grooves for end-position confirmation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.