
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X35-40B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X35-40B is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop from 0 to 35 mm directly on your machine.
Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. This specific SKU includes a male-thread M6x1.0 piston rod and lacks a piston magnet, meaning it cannot accommodate magnetic switches. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a locking mechanism.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X35-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 35 mm |
| Adjustable range | 0 – 35 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Swap product families on a packaging line and reposition the male M6x1.0 rod end on the fly, avoiding part changes or shims during rapid changeover.
Choose this configuration if your fixture requires on-site stroke tuning during commissioning or product changeovers. Confirm your parameters: 20 mm bore, 35 mm maximum stroke, 40 mm adjustment window, M5x0.8 air port, male M6x1.0 rod thread, and no magnet. Note that a plain cylinder does not hold its load when air is lost or the valve is centered; for load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the R (M6x1.0) screw shortens the extend position by up to 40 mm, yielding a usable extend range of 0 to 35 mm; retract remains full. This SKU has no magnet and cannot take a switch, but an -S variant adds a magnet compatible with AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.