
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-10B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X40-10B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke down from the 40mm maximum to a 30mm minimum directly at the machine, eliminating the need for shims or part swaps during fine-tuning. The retract motion remains full length.
The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. This specific SKU includes a male M6x1.0 piston rod and lacks a piston magnet, meaning it cannot accept reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 40 mm |
| Adjustable range | 30 – 40 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Set a precise 35 mm downward travel for seating delicate components, using the fixed NBR bumper to absorb the end shock without damaging the part.
When sizing this 20mm bore actuator, evaluate your force requirements bidirectionally.
Choose this configuration if your fixture requires on-site stroke tuning between 30 and 40 mm. Confirm your setup needs the male M6x1.0 rod thread, the M5x0.8 air port, and the fixed NBR bumper. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the speed range is 30-500 mm/s.
Turning the R (M6x1.0) screw shortens the extend end position by up to 10 mm, giving a usable outward range of 30 to 40 mm; the retract stroke remains full. This SKU has no piston magnet and cannot take a switch, but the -S variant adds a magnet compatible with AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.