
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-10S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X40-10S is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke from 30 to 40 mm directly on your machine, eliminating the need for shims or part swaps.
This 20 mm bore actuator uses an 8 mm piston rod and a female M4x0.7 rod-end thread. Its short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. The included -S piston magnet supports position sensing using AirTAC reed or electronic switches mounted in the body grooves.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 40 mm |
| Adjustable range | 30 – 40 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop in 1 mm increments to find the exact 30-40 mm contact point for a forming tool before locking it down.
Quickly alter the outward reach for different box widths on a packing line without disassembling the cylinder mount.
Use the built-in magnet with an electronic switch to verify the adjusted end position during a slow 30-500 mm/s test cycle.
When sizing this unit, evaluate both neighboring bores. Choose this specific actuator if your fixture requires frequent on-site stroke tuning between 30 and 40 mm during changeovers.
Confirm your parameters: 20 mm bore, 40 mm max stroke, 10 mm adjust window, M5x0.8 air port, built-in magnet (S), and female rod thread. Note that a plain pneumatic cylinder does not hold position if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
Turning the R (M6x1.0) screw shortens the extend end position from the 40 mm maximum down to 30 mm. The -S option denotes a built-in piston magnet for AirTAC reed or electronic switches; it does not alter the force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.