
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-20 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X40-20 is a compact double-acting cylinder featuring an external M6x1.0 adjuster screw that lets you dial the extend stop directly on your machine. You can set the outward travel anywhere between 20 and 40 mm without swapping shims or parts.
The short riveted body conserves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-travel shock is managed by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S option for position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 40 mm |
| Adjustable range | 20 – 40 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 40 mm during product family changeovers to accommodate varying jig heights without machining new spacers.
Find the exact extension point for a testing probe by adjusting the mechanical stop on the machine, avoiding the need to disassemble the cylinder for each trial.
Choose this unit if your assembly requires frequent on-site stroke tuning between 20 and 40 mm.
Confirm your parameters: 20 mm bore, 40 mm maximum stroke, 20 mm adjustment window, and an M5x0.8 port. The rod end features a female M4x0.7 thread. A plain SDAJ does not hold a load if air pressure drops or the valve centers—the fixed bumper merely decelerates the stroke end. To suspend a load securely without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa the push is 219.9 N and the pull is 184.7 N. The theoretical maximum push is 32 kgf at 1.0 MPa.
Turning the external R (M6x1.0) screw shortens the extend stroke by up to 20 mm, allowing you to set the outward travel anywhere between 20 and 40 mm. The retract stroke remains full, and the adjuster sets the mechanical stop without altering the cylinder's output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.