verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-30SB

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-30SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 10 to 40 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke40 mm
  • Adjustable range10–40 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$36.25 $43.75Save 17% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-30SB

The AirTAC SDAJ20X40-30SB is a compact double-acting double-rod cylinder built for tight spaces, featuring a short riveted body that saves axial mounting depth where round-body units fail to fit. An external M6x1.0 adjuster screw lets you dial the extend stop down from 40 mm to 10 mm directly on the machine, avoiding any part swaps or shims during changeovers.

This specific unit includes a built-in piston magnet for AirTAC reed or electronic switches, plus a male M6x1.0 threaded rod end for direct mounting. End shock is handled solely by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-30SB Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-30SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke40 mm
Adjustable range10 – 40 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-30SB

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×40Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-30SB Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop between 10 and 40 mm via the M6x1.0 screw to adapt a 94 N pick-and-place arm to new jig heights without machining spacers.

science

Trial Positioning

Use the male M6x1.0 rod end and adjustable stop to probe optimal sensor alignment in a lab fixture, locking the exact extend point once verified.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-30SB the Right Cylinder?

Choose this model if your fixture requires frequent on-site stroke tuning across the 10-40 mm window. Confirm your specifications: 20 mm bore, 40 mm maximum stroke, 30 mm adjustment window, M5x0.8 port, male M6x1.0 rod thread, and a magnetic piston. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end of travel and is not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-30SB FAQ

It operates between 0.15 and 1.0 MPa, tolerates -20 to +70 C, and runs at speeds of 30-500 mm/s.

The external R (M6x1.0) screw shortens the extend stroke by up to 30 mm, yielding a usable 10-40 mm range while retract remains full. The -S code indicates a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-30SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X40-30SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.