verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-40

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-40 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 40 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke40 mm
  • Adjustable range0–40 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$31.13 $38.63Save 19% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-40

The AirTAC SDAJ20X40-40 is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop down from a 40mm nominal stroke to zero on the machine.

Its short riveted body drastically cuts axial mounting depth where round-body or profile variants will not fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, meaning the screw dictates the endpoint but does not function as a mid-stroke lock.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-40 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-40
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke40 mm
Adjustable range0 – 40 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-40

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×40Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-40 Is Used

conveyor_belt

Changeover Diverters

Quickly reset the mechanical stop for different package sizes on a packaging line, using the 8kg vertical lift capacity to route goods efficiently.

sync_alt

Compact Ejectors

Fit the short riveted body into tight machine cells to eject parts, relying on the fixed NBR bumper to absorb the end shock at operating speeds up to 500mm/s.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-40 the Right Cylinder?

Choose this specific SKU when you need frequent on-site stroke tuning during changeovers, but remember a plain cylinder drifts when air is lost or the valve centers. The fixed bumper only decelerates near the end of travel; for true load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your bore, 40mm stroke, 40mm window, M5x0.8 port, female M4x0.7 rod thread, and absence of a magnet for this configuration.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-40 FAQ

The M6x1.0 screw shortens the extend stop by up to 40mm on-site, but it acts only as a mechanical stop and does not change the force. This SKU lacks a magnet for sensing, and because it has no lock, the cylinder will drift on air loss.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X40-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.