verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke45 mm
  • Adjustable range35–45 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$32.07 $39.57Save 18% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10B

The AirTAC SDAJ20X45-10B is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M6x1.0 adjuster screw lets you dial the outward stroke anywhere between 35 and 45 mm without changing parts.

This thin riveted-body design minimizes axial mounting depth where round-body units will not fit. The unit arrives with a male M6x1.0 piston rod (-B option) and a fixed NBR bumper at each end to absorb end-of-travel shock. Note this specific SKU lacks a piston magnet, so magnetic sensing is not supported.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke45 mm
Adjustable range35 – 45 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10B

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×45Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10B Is Used

precision_manufacturing

Tooling Calibration

Dial in the 35-45 mm extend stop during initial tooling calibration to precisely set a 94 N contact force without machining custom spacers.

science

Lab Test Fixturing

Fine-tune the outward travel in 1 mm increments for delicate lab testing fixtures where the fixed NBR bumper provides consistent, low-shock end positioning.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10B the Right Cylinder?

If your application demands less thrust, the smaller SDAJ16 provides 100.5 N at 0.5 MPa; stepping up to the SDAJ25 yields 245.4 N for heavier moves.

On-machine stroke tuning benefits setup-heavy lines requiring frequent changeovers. Remember that a plain cylinder drifts when air is lost or the valve centers—the fixed bumper only decelerates near the end and is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your specs: 20 mm bore, 45 mm max stroke, 10 mm window, M5x0.8 port, no magnet, and male M6x1.0 rod thread.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10B FAQ

It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.

Turning the R (M6x1.0) screw shortens the extend end position by up to 10 mm, giving a usable outward range of 35-45 mm; retract remains full. This SKU has no piston magnet, so magnetic switches cannot be used—you would need the -S variant for reed or electronic sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X45-10B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.