
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X45-10S is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjustment screw that dials the extend stop from 35 to 45 mm directly on your machine.
Its short riveted body drastically reduces axial mounting depth compared to round-body alternatives, fitting easily into space-constrained assemblies. This unit includes a built-in piston magnet (-S) for compatibility with AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the stroke ends without acting as a lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 45 mm |
| Adjustable range | 35 – 45 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 35-45 mm extend stop during prototype runs to find the exact contact point for delicate 94 N clamping forces without machining new spacers.
Quickly adjust the mechanical stop on packaging lines when switching box sizes, ensuring the 8 mm rod pushes the diverter accurately every time.
Fit the short riveted body into tight machine bays to eject parts, using the built-in magnet to confirm retraction before the next cycle begins.
This model is ideal for operators needing on-site stroke tuning during frequent changeovers without swapping parts. Remember that a plain cylinder does not hold its load when air is lost or the valve is centered; for load holding without live pressure, install an external rod lock or pilot-operated check valve. Configuration verified: 20 mm bore, 45 mm max stroke, 10 mm window, M5x0.8 port, female M4x0.7 rod thread, and -S magnet included.
Quick checklist
Turning the R (M6x1.0) screw shortens the extend stroke by up to 10 mm, giving a usable range of 35-45 mm without changing parts. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.