
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X45-10SB is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop directly on your machine. You can set the outward travel anywhere from 35 to 45 mm without swapping shims or parts, while the retract stroke remains full length.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, and a male M6x1.0 piston rod end (-B) instead of the default female thread. The short riveted body drastically cuts axial mounting depth where larger profile cylinders will not fit. End shock is managed by a fixed NBR bumper that decelerates the piston near the stroke limits, operating effectively at speeds of 30-500 mm/s.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 45 mm |
| Adjustable range | 35 – 45 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly re-adjust the outward reach on packaging lines for different carton widths, using the 10 mm window to fine-tune the diverter position on the fly.
When sizing this 20 mm bore actuator, evaluate both neighbouring options with real 0.5 MPa push figures: stepping down to the SDAJ16 provides 100.5 N, while moving up to the SDAJ25 yields 245.4 N. Choose this specific model if your fixture requires on-site stroke tuning to perfect a 35-45 mm extend position.
Confirm your parameters match the bore, 45 mm maximum stroke, 10 mm adjustment window, and M5x0.8 air port. This unit carries the -S magnet for position sensing and the -B male M6x1.0 rod thread. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centres; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the speed range is 30-500 mm/s.
The R (M6x1.0) screw acts as a mechanical stop, shortening the extend stroke by up to 10 mm, giving a usable range of 35-45 mm. It does not alter the output force. The -S code means a piston magnet is built-in, allowing you to mount AirTAC reed or electronic solid-state switches directly into the body sensor grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.