verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke45 mm
  • Adjustable range25–45 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$32.07 $39.57Save 18% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20

The AirTAC SDAJ20X45-20 is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop directly on your machine. You can tune the outward travel anywhere between 25 and 45 mm without swapping shims or parts, while the retract remains full length.

Built with a short riveted body, this unit saves valuable axial mounting depth where round-body or larger profile variants will not fit. It relies on a fixed NBR bumper at each end to decelerate the stroke, meaning it is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the bore dictates an M5x0.8 air port alongside an 8 mm rod.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke45 mm
Adjustable range25 – 45 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×45Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20 Is Used

conveyor_belt

Changeover Diverter

Quickly re-adjust the stroke on a packaging line when switching box sizes, using the M6x1.0 screw to set the new pusher end point on the fly.

vertical_align_center

Compact Lift

Lift an 8 kg fixture vertically in a tight axial envelope, leveraging the short riveted body where longer standard cylinders cannot fit.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20 the Right Cylinder?

When sizing this 20 mm bore actuator, evaluate your force needs against its neighbours. Choose this specific model if your fixture requires on-site stroke tuning across a 25-45 mm window. Confirm your specifications: 20 mm bore, 45 mm max stroke, 20 mm adjustment range, M5x0.8 port, female M4x0.7 rod thread, and no magnet. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centres; the piston will drift. For suspended loads, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20 FAQ

Turning the external R (M6x1.0) screw shortens the extend stop by up to 20 mm, giving a usable outward travel of 25-45 mm; retract remains full. This SKU lacks the -S magnet, so it cannot take reed or electronic switches. The -S variant adds a magnet for sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X45-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.