
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X45-20SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M6x1.0) screw, you shorten the outward stroke on-site across a 25 to 45 mm window, eliminating the need for shims or part swaps during changeovers.
This variant includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches, plus a male-thread M6x1.0 piston rod (-B) for secure tooling attachment. The short riveted body drastically reduces axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 45 mm |
| Adjustable range | 25 – 45 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 25 to 45 mm extend stop on machining fixtures to compensate for cutter wear, using the male M6 thread for rigid tool mounting.
Adjust the mechanical stop on the fly for varying box heights, ensuring precise folding force without re-engineering the pneumatic layout.
When sizing this 20 mm bore actuator, evaluate your force requirements bidirectionally.
Choose this specific configuration when your fixture requires on-site stroke tuning between 25 and 45 mm. It carries the -S magnet for position sensing and the -B male M6x1.0 rod end. Remember that a plain cylinder cannot hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For strict load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa. Operating pressure spans 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.
The R (M6x1.0) screw mechanically shortens the extend endpoint by up to 20 mm, giving a usable 25 to 45 mm range without altering the force. This unit includes a built-in magnet (-S) designed to trigger AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.