
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-30B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 15 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X45-30B is a compact double-acting double-rod cylinder featuring an on-site extend stop. A front M6x1.0 adjuster screw lets you dial the forward stroke anywhere from 15 to 45 mm, eliminating the need for shims or part swaps during machine commissioning.
This variant features a male M6x1.0 piston rod thread, replacing the default female M4x0.7, to suit specific mounting hardware. The short riveted body drastically reduces axial mounting depth where a larger profile cylinder will not fit. End-of-travel impact is managed strictly by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches without changing to an -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 45 mm |
| Adjustable range | 15 – 45 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rapidly reset the extend stop on-site for different product heights using the M6x1.0 adjuster screw, avoiding the downtime of mechanical shim replacement.
When sizing this 20 mm bore actuator, evaluate your force requirements against its neighbours.
Choose this model if your fixture requires frequent changeovers or trial positioning within the 15 to 45 mm extend window. The air port is M5x0.8, and the piston rod is 8 mm. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centred; the piston will drift. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 45 mm maximum stroke, 30 mm window, male M6 thread, and lack of magnet before ordering.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a proof pressure of 1.5 MPa, and the speed range is 30-500 mm/s.
Turning the external R (M6x1.0) screw shortens the extend stroke by up to 30 mm, giving a usable forward range of 15 to 45 mm without altering the force output. This specific SKU lacks a piston magnet and cannot take a switch; you must select an -S variant to use AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.