
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-30SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 15 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X45-30SB is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that saves mounting depth where larger profile housings fail to fit. An external M6x1.0 adjuster screw lets you dial the extend stop directly on the machine, yielding a usable forward range of 15-45 mm without swapping shims or components.
This specific unit includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 threaded rod end. End-of-travel shock is absorbed by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 45 mm |
| Adjustable range | 15 – 45 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 15 to 45 mm on the fly to find the exact contact point for prototype parts before locking the M6 screw.
Swap product families and re-tune the forward stroke in seconds without disassembling the cylinder or adding mechanical shims.
Choose this exact model if your fixture requires frequent on-site stroke tuning across a 15-45 mm window.
Confirm your parameters: 20 mm bore, 45 mm maximum stroke, 30 mm adjustment window, M5x0.8 air port, male M6x1.0 rod thread, and an integrated magnet for position sensing. Note that a plain compact cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
It operates between 0.15 and 1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
Turning the external R (M6x1.0) screw shortens the forward stroke by up to 30 mm, allowing the rod to stop anywhere between 15 mm and 45 mm; retract remains full. The included -S magnet enables use with AirTAC reed or electronic solid-state switches for end-of-stroke position confirmation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.