
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-40B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X45-40B is a compact double-acting double-rod cylinder featuring an external extend stop. A front R (M6x1.0) adjuster screw lets you dial the extend position down from the 45 mm maximum to as low as 5 mm directly on the machine, avoiding part swaps. This on-site tuning is ideal for trial positioning and frequent changeovers.
The short riveted body minimizes axial footprint where space is tight. This unit uses a fixed NBR bumper at each end to decelerate the stroke, and it carries the B option, meaning the 8 mm rod terminates in a male M6x1.0 thread.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 45 mm |
| Adjustable range | 5 – 45 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M6x1.0 R screw to shift the rod end position between product runs, accommodating different part heights without swapping cylinders.
Choose this unit if your fixture requires exact extend depth tuning between 5 and 45 mm.
Remember that a plain cylinder drifts when air is lost or the valve centers, as the fixed NBR bumper only decelerates near the end of travel and is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your setup needs bore 20, 45 mm max stroke, 40 mm window, M5x0.8 port, no magnet, and a male M6x1.0 rod thread.
Quick checklist
The front M6x1.0 screw shortens the extend stop by up to 40 mm, giving a usable 5 to 45 mm range. This SKU lacks the S option, so it has no piston magnet and cannot accept reed or electronic switches; you would need the S variant for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.