
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X5-10B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X5-10B is a double-acting compact cylinder featuring a male M6x1.0 piston rod and an external M6x1.0 R adjuster screw. This mechanism lets you dial the extend stop down to a 0-5 mm window directly on the machine, eliminating the need for shims or part swaps during commissioning.
The short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot. End-of-stroke energy is managed solely by a fixed NBR bumper that decelerates the piston, not by an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches; adding the -S option resolves this if sensing is required.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X5-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 5 mm |
| Adjustable range | 0 – 5 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×5 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Speed up product changeovers on packaging lines by turning the external adjuster to shift the extend endpoint, utilizing the compact riveted body to fit tight tooling spaces.
Choose this 20 mm bore if your fixture requires on-site extend tuning within that 0-5 mm range, but verify your exact porting (M5x0.8), the male M6x1.0 rod thread, and the 10 mm adjustment window.
Remember that a plain SDAJ does not hold position or carry a load if air pressure drops or the valve centers. The fixed NBR bumper only decelerates the stroke near its end, and the R screw acts strictly as a mechanical stop, never a lock. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s within a pressure range of 0.15-1.0 MPa.
The M6x1.0 R screw shortens the extend stroke by up to 10 mm, yielding a usable 0-5 mm extend range while retract remains full. This SKU has no piston magnet and cannot take a switch; you must select the -S variant to use AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.