
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X5-10SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X5-10SB is a compact double-acting double-rod cylinder engineered for applications requiring exact extend positioning. By turning the external M6x1.0 adjuster screw, you can dial the extend stop down from the nominal 5 mm maximum to a 0 mm flush position directly on the machine.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 threaded rod end. The short riveted body minimizes axial mounting depth where space is tight. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X5-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 5 mm |
| Adjustable range | 0 – 5 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×5 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 0 and 5 mm to set exact sensor contact depth on machined parts without swapping shims during product changeovers.
Fit the compact riveted body into tight transfer conveyors, using the male M6 rod end to push lightweight components exactly 2 to 4 mm into a nesting fixture.
When sizing this unit, evaluate your force requirements bidirectionally.
Choose this specific model if your fixture requires frequent on-site stroke tuning to accommodate varying part heights. Confirm your parameters match the 20 mm bore, 5 mm maximum stroke, 10 mm adjustment window, and M5x0.8 port. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 32 kgf at 1.0 MPa.
The M6x1.0 adjuster screw shortens the extend stroke by up to 10 mm, allowing you to set the extend position anywhere between 0 and 5 mm. The included -S magnet enables position sensing with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.