
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-10S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 40 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X50-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M6x1.0) screw lets you dial the extend position on-site between 40 and 50 mm without swapping shims or parts.
Its short riveted body drastically cuts axial mounting depth where a longer profile unit will not fit. The unit relies on a fixed NBR bumper to decelerate at the stroke end, and the built-in magnet (-S) supports AirTAC reed or electronic solid-state switches for position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 50 mm |
| Adjustable range | 40 – 50 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 50 mm during machine changeovers to accommodate different part heights without machining new spacers.
Use the M6x1.0 adjuster screw to iterate the end-stop during prototyping, finding the exact 8 kg vertical lift position before locking the collar.
Choose this specific model if your fixture requires frequent on-site stroke tuning across its 10 mm window. Confirm the 50 mm maximum stroke, 10 mm adjustability, M5x0.8 port, and female M4x0.7 rod-end thread. Note that a plain cylinder does not hold its load on air loss or valve centering; the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The R (M6x1.0) screw shortens the extend stop by up to 10 mm, giving a usable range of 40 to 50 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing. The screw is a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.