verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke50 mm
  • Adjustable range30–50 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$32.99 $40.49Save 18% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20B

The AirTAC SDAJ20X50-20B is a compact double-acting cylinder featuring an external M6x1.0 adjuster screw that lets you dial the extend stop anywhere between 30 and 50 mm directly on the machine. The short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot.

This specific SKU includes a male-thread M6x1.0 piston rod and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to the -S variant. End-of-stroke energy is managed solely by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke50 mm
Adjustable range30 – 50 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20B

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×50Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20B Is Used

precision_manufacturing

Trial Positioning Jigs

Dial the extend stop from 30 to 50 mm to find the exact contact point for prototype parts without machining new spacers.

view_module

Compact Pin Insertion

Fit the short riveted body into tight assembly cells and fine-tune the 8 kg pressing depth via the M6 screw.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20B the Right Cylinder?

Choose this unit when you need frequent on-site stroke tuning during setup or changeovers without swapping shims.

Confirm the 50 mm maximum stroke, 20 mm adjustment window, M5x0.8 port, and male M6x1.0 rod thread for your mounting interface. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centres; the fixed bumper only decelerates near the end of travel. For suspended loads that must resist drift, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 30–50 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20B FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

The M6x1.0 R screw mechanically shortens the extend end position by up to 20 mm, yielding a usable 30 to 50 mm stroke. This SKU lacks a magnet, so it cannot take a switch; you must select the -S option to use AirTAC reed or electronic sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X50-20B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.