
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20H is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X50-20H is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M6x1.0 adjuster screw lets you dial the outward stroke anywhere between 30 and 50 mm directly on your equipment, eliminating the need for shims or part swaps.
This variant includes fluororubber (FKM) seals for enhanced thermal and oil resistance. The short riveted body saves valuable axial mounting depth where round-body or larger profile units will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S option.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20H |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 50 mm |
| Adjustable range | 30 – 50 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Utilize the FKM seals to position small testing probes in heated environments, relying on the fixed NBR bumper to decelerate the stroke at the final 50 mm mark.
When sizing this unit, evaluate both neighboring bores against your real force needs. Choose this specific model if your fixture requires on-site stroke tuning to accommodate multiple part heights. Verify your parameters: 20 mm bore, 50 mm max stroke, 20 mm window, M5x0.8 port, female M4x0.7 rod thread, and no magnet. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end of travel and does not lock the load. For secure holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
Operating pressure spans 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges 30-500 mm/s.
The R (M6x1.0) screw shortens the extend stop by up to 20 mm, providing a usable 30-50 mm range without altering force. The screw is a mechanical stop, not a mid-stroke lock. The cylinder cannot hold a load on air loss; use an external rod lock or pilot-operated check valve for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.