
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-40 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 10 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X50-40 is a compact double-acting double-rod cylinder built for applications requiring precise extend positioning. An external M6x1.0 adjuster screw lets you dial the forward stop anywhere between 10 and 50 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains a full 50 mm stroke.
The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, not an adjustable air cushion. Note this specific SKU lacks a piston magnet and cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 50 mm |
| Adjustable range | 10 – 50 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 50 mm down to 10 mm via the M6x1.0 screw to accommodate varying part heights on a machining line without swapping cylinders.
Use the 40 mm adjustment window to safely trial different extend endpoints during R&D fixture validation, relying on the fixed NBR bumper to absorb test impacts.
When sizing this 20 mm bore actuator, evaluate your force needs bidirectionally.
Choose this model if your fixture requires frequent on-site stroke tuning within the 10 to 50 mm window. Confirm your setup needs an M5x0.8 port, a female M4x0.7 rod-end thread, and no position sensing. Remember that the fixed NBR bumper only decelerates the stroke end; it is not a lock. If you must hold a load during air loss or valve centering, install an external rod lock or pilot-operated check valve.
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
This specific SKU has no piston magnet, so it cannot accept reed or electronic switches; you would need the -S option variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.