
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-50B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X50-50B is a compact double-acting double-rod cylinder featuring an on-site extend stop. By turning the R (M6x1.0) adjuster screw, you can dial the forward stroke anywhere from 0 to 50 mm without swapping parts or adding shims. The retract motion remains full length.
This variant uses a male M6x1.0 piston rod thread and lacks a piston magnet. Its short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. End shock is managed by a fixed NBR bumper that decelerates the stroke end, meaning it is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 50 mm |
| Adjustable range | 0 – 50 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 50 mm during prototype runs to find the exact 8 kg vertical contact point without machining new spacers.
Fit the short riveted body into tight transfer gaps and set the mechanical stop to tune divert stroke length precisely during commissioning.
Choose this specific model if your fixture requires on-site stroke tuning to dial in exact end positions.
Confirm your parameters: 20 mm bore, 50 mm maximum stroke, 50 mm adjustment window, M5x0.8 port, male M6x1.0 rod thread, and no magnet. A plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The R (M6x1.0) screw mechanically shortens the extend stop from 50 mm down to 0 mm; it does not change force. The cylinder cannot hold a load on air loss, and the fixed NBR bumper only decelerates the end of travel.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.