
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-10B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.
The SDAJ20X55-10B is a compact double-acting double-rod cylinder built for tight axial mounting spaces. Its short riveted body saves footprint depth where larger profile cylinders fail to fit. An external M6x1.0 adjuster screw lets you dial the extend stop directly on the machine, yielding a usable forward range of 45 to 55 mm without swapping shims or parts.
This specific SKU features a male M6x1.0 threaded rod end and lacks a piston magnet, meaning it cannot host reed or electronic switches. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 55 mm |
| Adjustable range | 45 – 55 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 45 to 55 mm extend stop during initial tooling setup to find the perfect clamping depth before locking the M6x1.0 adjuster screw.
Lift light 8 kg assemblies in tight axial cavities where the compact riveted body saves space, adjusting the stop to prevent overtravel into upper fixtures.
When sizing this unit, evaluate both neighboring bores against your 0.5 MPa requirements. Choose this specific model if your fixture requires on-site extend tuning between 45 and 55 mm. Confirm your build needs the male M6x1.0 rod thread, the M5x0.8 air port, and the 10mm adjustment window. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end of travel and never locks the load. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
Turning the R (M6x1.0) external screw mechanically shortens the extend stop, giving a usable forward range of 45 to 55 mm without changing parts. This screw is only a mechanical stop, not a mid-stroke lock. Furthermore, this SKU lacks the -S magnet option, so it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.