
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-10S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X55-10S is a compact double-acting double-rod cylinder featuring an on-site extend stop. A side-mounted M6x1.0 adjuster screw lets you dial the outward travel anywhere between 45 and 55 mm, eliminating the need for shims or part swaps during machine commissioning.
This thin riveted-body design saves valuable axial mounting depth where larger profile cylinders cannot fit. The unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a load-holding brake.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 55 mm |
| Adjustable range | 45 – 55 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 45-55 mm extend stop on a machining fixture to compensate for cutting tool wear without disassembling the cylinder mount.
Fine-tune the push rod end-point on the fly to accommodate varying box heights, ensuring precise flap closure during rapid format changeovers.
Set precise trial engagement distances for sensor testing rigs, leveraging the 8 kg vertical lift capacity and integrated electronic switch feedback.
Choose this specific model when your assembly requires exact 45-55 mm outward travel tuning right at the fixture.
Confirm the 55 mm maximum stroke, 10 mm adjustment window, M5x0.8 air port, and the female M4x0.7 rod-end thread suit your tooling. The -S magnet enables position sensing, but remember a standard cylinder drifts if air pressure drops; for vertical load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 32 kgf at 1.0 MPa.
The M6x1.0 R screw shortens the extend stroke by up to 10 mm, allowing usable travel between 45 and 55 mm. The built-in -S magnet works with AirTAC reed or electronic switches for position detection, while the fixed NBR bumper handles end shock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.