verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke55 mm
  • Adjustable range35–55 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$33.93 $41.43Save 18% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20

The AirTAC SDAJ20X55-20 is a compact double-acting double-rod cylinder featuring an on-site extend stop. A lateral M6x1.0 adjuster screw lets you dial the forward end-position anywhere between 35 and 55 mm without changing parts.

This riveted-body unit saves valuable axial mounting depth where longer profile designs cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than a tunable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; adding the -S option enables sensing.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke55 mm
Adjustable range35 – 55 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×55Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20 Is Used

precision_manufacturing

Probe Contact Setup

Dial the extend stop from 35 to 55 mm to set precise electrical probe contact pressure on varying circuit board widths without machining new spacers.

packaging

Carton Flap Folding

Adjust the mechanical stop on-site to accommodate different box heights, ensuring the 8 mm rod folds flaps accurately at a safe 94 N working load.

science

Lab Dispense Positioning

Fine-tune the fluid nozzle drop distance in 1 mm increments during trial runs, relying on the fixed NBR bumper to absorb the impact at the end of travel.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20 the Right Cylinder?

Choose this model when your fixture requires exact 35-55 mm extend tuning during commissioning or product changeover.

Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers; the piston drifts and the fixed bumper only absorbs end shock. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your spec needs an M5x0.8 port, a female M4x0.7 rod thread, and no magnet (S) or male rod (B).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–55 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20 FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

Turning the M6x1.0 adjuster screw shortens the forward stroke by up to 20 mm, giving a usable extend range of 35 to 55 mm. It sets the mechanical stop position and does not alter the cylinder's force output.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X55-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.