
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X55-20B is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that lets you dial the extend stop anywhere between 35 and 55 mm directly on your equipment. This specific SKU includes a male-threaded M6x1.0 piston rod end and lacks a piston magnet.
Its short riveted body drastically cuts axial mounting depth, fitting into tight spaces where bulkier actuators fail. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa, and the unit travels at speeds of 30-500 mm/s.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 55 mm |
| Adjustable range | 35 – 55 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the extend stop from 35 to 55 mm via the M6x1.0 screw to perfect part clamping depth on precision machining fixtures without machining new spacers.
Find the exact contact point for a 8 kg vertical lift assembly by sweeping the 20 mm adjustment window on the test bench before locking down the final mechanical stop.
Choose this model if your fixture requires on-site stroke tuning during frequent changeovers, and confirm your setup needs the male M6x1.0 rod thread along with the M5x0.8 air port.
Remember that a plain cylinder cannot hold a load if air pressure drops or the valve centers; the piston will drift. The fixed NBR bumper only decelerates the stroke near the end and the M6x1.0 adjuster acts purely as a mechanical stop, neither serving as a brake. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The air port is M5x0.8, and the piston rod features a male M6x1.0 thread.
Turning the external R (M6x1.0) screw shortens the extend stroke by up to 20 mm, giving a usable range of 35 to 55 mm. The screw is strictly a mechanical stop and does not alter force; the cylinder cannot hold a load on air loss, so you need an external rod lock for position holding. This SKU lacks a piston magnet, but adding the -S option enables reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.