
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X55-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the forward end-position anywhere between 35 and 55 mm directly on your equipment, eliminating the need for shims or part swaps during changeovers. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit.
This specific build includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 55 mm |
| Adjustable range | 35 – 55 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 55 mm via the M6x1.0 screw during fixture swaps, hitting exact trial positions without machining new spacers.
Set a precise mechanical bottom dead center for seating pins, relying on the fixed NBR bumper to absorb the 157.1 N end impact consistently.
When sizing this unit, consider the neighboring bores to ensure optimal force matching.
This model is specified with a 20 mm bore, a 55 mm maximum stroke, a 20 mm adjustment window, and an M5x0.8 port. It includes the -S magnet for sensing and a female M4x0.7 rod-end thread. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 32 kgf at 1.0 MPa.
Turning the external R (M6x1.0) screw shortens the extend stroke by up to 20 mm, giving a usable forward range of 35 to 55 mm; the retract stroke remains full. The -S option denotes a built-in piston magnet, allowing you to mount AirTAC reed or electronic solid-state switches directly into the body sensor grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.