
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X55-20SB is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke from 35 to 55 mm directly on the machine, eliminating the need for shims.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 piston rod. The short riveted body minimizes axial footprint where space is tight. End shock is managed by a fixed NBR bumper, which decelerates the piston near the end of travel rather than acting as an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 55 mm |
| Adjustable range | 35 – 55 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Tune the outward stroke on-site for different package sizes, using the male M6x1.0 rod to push routing gates without swapping cylinders.
When sizing this 20 mm bore, check both neighbours.
Choose this unit if your fixture requires frequent on-site stroke tuning or changeovers. Confirm your parameters: 20 mm bore, 55 mm max stroke, 20 mm adjust window, M5x0.8 port, male M6x1.0 rod thread, and the integrated magnet. Note that a plain cylinder drifts when air is lost or the valve is centred; the bumper only decelerates the end of travel. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 R screw shortens the extend stop by up to 20 mm, yielding a usable 35-55 mm range while maintaining full retract. The included -S magnet works with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.