
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-30B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 25 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X55-30B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. Turning the external M6x1.0 adjuster screw lets you dial the outward stroke anywhere between 25 and 55 mm without swapping shims or parts.
Its short riveted body minimizes axial mounting depth where a larger profile cylinder will not fit. This specific SKU includes a male M6x1.0 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 55 mm |
| Adjustable range | 25 – 55 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 55 mm to accommodate varying raw material thicknesses on a machining fixture without machining new spacers.
Adjust the mechanical stop to nudge parts into place on a conveyor, using the male M6 thread to mount custom contact tips tailored to each product run.
Choose this male-rod (-B) configuration when your tooling requires an M6x1.0 threaded attachment point. The 55 mm nominal stroke with a 30 mm window is ideal for fixtures needing frequent changeovers. Remember that a plain cylinder drifts when air is lost or the valve centers—the fixed bumper only decelerates near the end and is not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
Operating speed ranges from 30 to 500 mm/s.
The M6x1.0 adjuster screw mechanically shortens the extend stroke by up to 30 mm, allowing on-machine tuning between 25 and 55 mm. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.