
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-40B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 15 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X55-40B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M6x1.0 adjuster screw lets you dial the extend position anywhere between 15 and 55 mm directly on your machine, eliminating the need for shims or part swaps.
This variant features a male M6x1.0 threaded piston rod and includes no piston magnet. Its short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 55 mm |
| Adjustable range | 15 – 55 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 15 to 55 mm during prototype runs to find the exact 94 N safe working contact point without machining new spacers.
Tune the pusher stroke on-site for varying carton widths, relying on the fixed NBR bumper to absorb the end shock at operating speeds up to 500 mm/s.
Leverage the short riveted body to fit within tight tooling envelopes while adjusting the male M6 rod extension to clamp parts of mixed heights.
When sizing this 20 mm bore actuator, evaluate your force requirements bidirectionally.
Choose this specific configuration if your fixture requires on-site stroke tuning across a 40 mm window. Confirm your setup needs the male M6x1.0 rod end, the M5x0.8 air port, and a 55 mm maximum stroke. Note that a plain cylinder does not hold position if air pressure drops or the valve is centered; for load holding without live pressure, install an external rod lock or pilot-operated check valve. Since this SKU lacks the -S magnet, it cannot accept magnetic switches.
Quick checklist
The theoretical maximum push force is 32 kgf at 1.0 MPa.
The M6x1.0 adjuster screw mechanically limits the extend stroke, allowing you to set the end position anywhere between 15 and 55 mm. It does not alter the piston area or force, and it is not a mid-stroke lock. This specific SKU lacks a piston magnet, so it cannot support reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.