verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 5 to 55 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke55 mm
  • Adjustable range5–55 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$33.93 $41.43Save 18% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50

The AirTAC SDAJ20X55-50 is a double-acting compact cylinder featuring an external M6x1.0 adjustment screw that dials the extend stop anywhere between 5 and 55 mm directly on your machine.

Its short riveted body drastically reduces axial mounting depth where larger profile or round-body units cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke55 mm
Adjustable range5 – 55 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×55Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50 Is Used

precision_manufacturing

Trial Positioning Probes

Dial the extend stop from 5 to 55 mm to find the exact contact point for delicate test probes without machining new spacers.

view_module

Adjustable Push-off Pins

Tune the mechanical stop on the fly for ejector pins in assembly nests, accommodating varying component heights on the fly.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50 the Right Cylinder?

Choose this model if your fixture requires frequent on-site stroke tuning during setup or product changeovers.

Confirm your parameters: 20 mm bore, 55 mm maximum stroke, 50 mm adjust window, and an M5x0.8 port. The rod end features a female M4x0.7 thread. Remember that a plain cylinder drifts when air is lost or the valve is centred; the bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–55 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50 FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.

Turning the external R (M6x1.0) screw shortens the extend end-position by up to 50 mm, giving a usable extend range of 5 to 55 mm. It functions strictly as a mechanical stop and does not alter force. It cannot hold a load mid-stroke or lock position upon air loss; use an external rod lock for that.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X55-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.