verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 5 to 55 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke55 mm
  • Adjustable range5–55 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$33.93 $41.43Save 18% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50B

The AirTAC SDAJ20X55-50B is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop from 5 to 55 mm. This thin riveted body drastically reduces axial mounting depth where round-body or profile variants will not fit.

This specific SKU includes a male-thread M6x1.0 piston rod for direct mounting and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke55 mm
Adjustable range5 – 55 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50B

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×55Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50B Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop between 5 and 55 mm during machine setup to accommodate different part heights without machining new spacers.

science

Prototype Positioning

Use the male M6x1.0 rod to mount experimental probes, sweeping the extend endpoint iteratively to find the exact optimal placement.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50B the Right Cylinder?

Choose this unit if your fixture requires frequent on-site stroke tuning without part changes.

Confirm your parameters: 20 mm bore, 55 mm maximum stroke, 50 mm adjust window, and an M5x0.8 air port. The male M6x1.0 rod thread (-B) is standard here, and there is no magnet (-S omitted). Remember that a plain cylinder does not hold position upon air loss or valve centering; the fixed bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–55 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50B FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

Turning the R (M6x1.0) screw mechanically shortens the extend stroke down to 5 mm, while 55 mm is the maximum. The screw acts purely as a stop and does not alter force. It cannot hold a load mid-stroke if air is lost; for load holding you need an external rod lock or pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-50B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X55-50B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.