verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke60 mm
  • Adjustable range50–60 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$41.63 $49.13Save 15% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10S

The AirTAC SDAJ20X60-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M6x1.0) screw, you can dial the forward stroke down from its 60 mm maximum to 50 mm directly on the machine, avoiding any part swaps. This on-site tuning is ideal for dialling in trial positions during a new setup.

The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. A fixed NBR bumper handles end-of-stroke deceleration, and the included -S piston magnet supports AirTAC reed or electronic switches for position confirmation.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke60 mm
Adjustable range50 – 60 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10S

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×60Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10S Is Used

precision_manufacturing

Trial Positioning Jigs

Dial in the exact extend stop between 50 and 60 mm during prototype runs, using the M6x1.0 adjuster to find the perfect contact point without swapping shims.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10S the Right Cylinder?

Choose this model if your fixture requires frequent changeovers or precise endpoint tweaking within that 50-60 mm window.

Remember that a plain compact cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates the stroke end and the R screw is a mechanical stop, neither acts as a brake. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore (20 mm), total stroke (60 mm), adjustment window (10 mm), M5x0.8 port, built-in magnet (S), and female M4x0.7 rod-end thread before ordering.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 50–60 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10S FAQ

The R (M6x1.0) screw shortens the extend stroke by up to 10 mm, giving a usable range of 50-60 mm; retract remains full. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X60-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.