
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X60-10SB is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M6x1.0 adjuster screw lets you dial the forward end-position anywhere between 50 and 60 mm, eliminating the need for shims or part swaps during commissioning.
Built with a short riveted body, this unit saves valuable axial mounting depth where larger profile or round-body actuators will not fit. It carries a built-in piston magnet for AirTAC reed or electronic switches, and comes with a male M6x1.0 rod end. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 60 mm |
| Adjustable range | 50 – 60 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 50-60 mm extend point during short-run changeovers using the M6x1.0 screw, perfect for finding the optimal clamping depth before locking down a fixture.
Fine-tune the folding arm extension by up to 10 mm on-site to accommodate minor corrugated thickness variations without swapping out the entire actuator assembly.
Choose this specific model if your fixture requires exact 50 to 60 mm extend tuning on the machine.
This configuration includes the -S magnet for position sensing and the -B male M6x1.0 piston rod. Operating speed spans 30-500 mm/s via the M5x0.8 port. Remember that a plain cylinder does not hold position if air pressure drops or the valve centers; the fixed bumper only decelerates the stroke end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 32 kgf at 1.0 MPa.
Turning the external R (M6x1.0) screw shortens the extend stroke within a 50 to 60 mm range without altering the output force. The included -S magnet enables tracking by AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.