verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke60 mm
  • Adjustable range40–60 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$35.58 $43.08Save 17% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20

The AirTAC SDAJ20X60-20 is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop anywhere between 40 and 60 mm.

Its short riveted body drastically cuts axial mounting depth where round-body or profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke60 mm
Adjustable range40 – 60 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×60Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20 Is Used

straighten

Gauge Pin Insertion

Dial the 40-60 mm extend stop to seat delicate measuring pins into varying material thicknesses without reprogramming the motion controller.

sync_alt

Changeover Dialing

Rapidly shift the extend endpoint by up to 20 mm during product family changeovers on a compact assembly line without swapping hardware.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20 the Right Cylinder?

Choose this configuration if your fixture requires frequent on-site stroke tuning during changeovers. Keep in mind the plain cylinder will not hold a load if air pressure drops or the valve centers; the bumper only decelerates the stroke end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your requirements for the 20 mm bore, 60 mm maximum stroke, 20 mm window, M5x0.8 port, female M4x0.7 rod thread, and the absence of a magnet.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–60 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20 FAQ

The theoretical maximum force is 32 kgf at 1.0 MPa, with an operating speed of 30-500 mm/s.

Turning the R (M6x1.0) screw shortens the extend stroke by up to 20 mm, allowing the rod to stop anywhere between 40 and 60 mm. The retract stroke remains full. This mechanism acts purely as a mechanical stop and does not alter the cylinder's force output.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X60-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.