
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X60-20B is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke anywhere between 40 and 60 mm directly at the machine, eliminating the need for shims or part swaps.
This variant features a male M6x1.0 piston rod thread and includes no piston magnet. Its short riveted body minimizes axial mounting depth where round-body or profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 60 mm via the M6 screw to establish exact tooling clearance during initial machine commissioning without machining new spacers.
Fine-tune the male M6 rod endpoint in 1 mm increments during prototype fixturing to find the optimal contact point before locking the jam nut.
When sizing this 20 mm bore actuator, evaluate your force needs bidirectionally.
Choose this specific configuration when your assembly requires on-site stroke tuning across a 40 to 60 mm window. Confirm your setup requires the male M6x1.0 rod end and an M5x0.8 port. Note that a plain cylinder does not hold position upon air loss or valve centering; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Since this SKU lacks the -S magnet, it cannot accept AirTAC reed or electronic switches.
Quick checklist
The theoretical maximum push force is 32 kgf at 1.0 MPa.
Turning the R M6x1.0 external screw shortens the extend end position by up to 20 mm, giving a usable outward range of 40 to 60 mm. The retract stroke remains full. This mechanism sets the mechanical stop and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.