
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X60-20SB is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke anywhere between 40 and 60 mm directly on the machine, eliminating the need for shims.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 rod thread. The short riveted body saves axial mounting depth where space is tight. End shock is managed by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 60 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Iterate on the exact extend position during R&D trials, relying on the male M6x1.0 rod thread to mount experimental probes securely.
When sizing this 20 mm bore, verify your force requirements both ways. Choose this model if your assembly requires frequent on-site stroke tuning between 40 and 60 mm.
Confirm the 20 mm bore, 60 mm maximum stroke, 20 mm adjust window, and M5x0.8 port. The -S code provides the magnet for position sensing, and -B supplies the male M6x1.0 rod end. Note that a plain cylinder does not hold a load if air pressure drops or the valve centres; the fixed bumper only decelerates the stroke end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 219.9 N. The theoretical maximum push force is 32 kgf at 1.0 MPa.
Turning the M6x1.0 R screw shortens the extend stroke by up to 20 mm, allowing you to set the outward stop anywhere between 40 and 60 mm. The -S code adds a built-in piston magnet compatible with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.