
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-30S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X60-30S is a compact double-acting double-rod cylinder built for applications demanding exact extend positioning. An external M6x1.0 adjuster screw lets you dial the forward stop anywhere between 30 and 60 mm directly on the machine.
This riveted-body design saves valuable axial mounting depth where round-body or profile cylinders cannot fit. The unit includes a built-in piston magnet (-S) for AirTAC reed or electronic solid-state switches, and relies on a fixed NBR bumper to decelerate the stroke end. The piston rod is 8 mm with an M4x0.7 female rod-end thread.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 60 mm via the M6x1.0 screw during machine changeovers, accommodating varying part widths without machining new spacers.
Find the exact contact point for test probes by adjusting the forward stroke on the bench, then locking the position for repeatable 8 kg vertical testing.
Choose this specific model if your fixture requires frequent on-site stroke tuning between 30 and 60 mm.
Confirm the bore, 60 mm maximum stroke, 30 mm window, and M5x0.8 air port. The -S code ensures switch readiness, while the female rod thread is standard. Note that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
Turning the R (M6x1.0) adjuster screw shortens the extend stroke by up to 30 mm, giving a usable forward range of 30-60 mm without changing parts. The included -S magnet works with AirTAC reed or electronic switches for position sensing. The adjuster sets the mechanical stop and does not alter force or lock mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.