
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-30SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The SDAJ20X60-30SB is a compact double-acting cylinder featuring an external M6x1.0 adjustment screw that dials the extend stop anywhere between 30 and 60 mm on-site.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 rod end. Its short riveted body conserves axial mounting depth where space is tight, while a fixed NBR bumper decelerates the stroke end. The screw functions strictly as a positioning stop, not a mid-stroke lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 60 mm during product family switchover to reposition a 94 N clamping head without machining new spacers.
Iteratively fine-tune the male M6x1.0 rod extension for a sensor bracket mount, locking the exact 45 mm reach after physical testing.
When sizing this 20 mm bore actuator, compare it both ways: stepping down to a 16 mm bore drops the 0.5 MPa push to 100.5 N, whereas moving up to a 25 mm bore increases it to 245.4 N.
Choose this specific configuration when your fixture requires frequent on-machine stroke tuning during changeovers. Confirm the 20 mm bore, 60 mm maximum stroke, 30 mm adjustment window, M5x0.8 port, male M6x1.0 rod thread, and the integrated magnet. Remember that a plain cylinder drifts when air is lost or the valve is centered; add an external rod lock or pilot-operated check valve if you must hold a load without live pressure.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 adjuster screw shortens the extend end position by up to 30 mm, giving a usable range of 30 to 60 mm. The integrated magnet allows tracking by AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.