verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-20SB

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-20SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 45 to 65 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke65 mm
  • Adjustable range45–65 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$43.49 $50.99Save 14% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-20SB

The AirTAC SDAJ20X65-20SB is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that lets you dial the extend stop precisely between 45 and 65 mm directly on the machine.

This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 piston rod end. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit, while a fixed NBR bumper decelerates the stroke end without acting as a lock.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-20SB Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-20SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke65 mm
Adjustable range45 – 65 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-20SB

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×65Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-20SB Is Used

conveyor_belt

Changeover Diverter Gates

Quickly tune the stroke length on packaging lines without changing parts, using the male M6x1.0 rod to swap tooling.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-20SB the Right Cylinder?

Choose this specific model if your fixture requires frequent on-site stroke tuning during changeovers.

Verify your parameters match the SDAJ20X65-20SB code: a 20 mm bore, 65 mm maximum stroke, 20 mm adjustment window, M5x0.8 port, male M6x1.0 rod thread, and the integrated magnet. Remember that a plain cylinder does not hold its load when air is lost or the valve is centred; the piston drifts and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-20SB FAQ

It operates at 30-500 mm/s and accepts pressures from 0.15 to 1.0 MPa.

Turning the external R (M6x1.0) screw shortens the extend end-position by up to 20 mm, yielding a usable 45-65 mm range while maintaining full retract. The -S code indicates a built-in piston magnet for AirTAC reed or electronic switches, and the -B denotes the male M6x1.0 rod thread.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-20SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X65-20SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.