verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 65 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke65 mm
  • Adjustable range35–65 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$37.19 $44.69Save 16% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30

The AirTAC SDAJ20X65-30 is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop between 35 and 65 mm. Retract travel stays at the full 65 mm length.

This riveted-body design saves axial mounting depth where larger profile or round-body units fail to fit. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, and this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke65 mm
Adjustable range35 – 65 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×65Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30 Is Used

precision_manufacturing

Trial Positioning Stops

Dial the extend stop from 35 to 65 mm to find the exact contact point for prototype parts without machining new spacers.

conveyor_belt

Changeover Diverter Arms

Quickly reset the mechanical stop depth for different package widths on a packaging line, saving setup time between runs.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30 the Right Cylinder?

Choose this 35-65 mm adjustable unit for fixtures requiring frequent on-machine stroke tuning during product changeovers.

Remember that a plain SDAJ does not hold position upon air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end of travel. For suspended loads, specify an external rod lock or pilot-operated check valve. This configuration uses an M5x0.8 port, a female M4x0.7 rod-end thread, a 30 mm adjustment window, no magnet, and operates at 30-500 mm/s.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30 FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

Turning the external M6x1.0 screw shortens the extend end-position by up to 30 mm, giving a usable extend range of 35 to 65 mm. This sets the mechanical stop and does not alter the output force. Note this SKU lacks a piston magnet, so it cannot accept reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X65-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.