
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X65-30B is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a male M6x1.0 piston rod and an external extend stop. A fixed NBR bumper decelerates the piston at the end of travel rather than relying on an adjustable air cushion. Turning the R (M6x1.0) adjuster screw lets you dial the extend position anywhere between 35 and 65 mm directly on the machine.
The short riveted body saves mounting depth where a longer cylinder will not fit. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 65 mm |
| Adjustable range | 35 – 65 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 35 and 65 mm to find the exact contact point for prototype parts without machining new spacers.
Fit the short riveted body into dense tooling grids to push parts clear of molds using the male M6x1.0 rod end.
It is ideal for setups requiring frequent on-machine stroke tuning during changeovers.
This SKU includes the -B male-thread M6x1.0 rod end but lacks the -S magnet, so it cannot accept reed or electronic switches. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centers; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa the push is 219.9 N and the pull is 184.7 N. The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 R screw mechanically shortens the extend end position by up to 30 mm, allowing a usable stroke of 35 to 65 mm. It sets the hard stop and does not alter the force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.