verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-40SB

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-40SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 25 to 65 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke65 mm
  • Adjustable range25–65 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$43.49 $50.99Save 14% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-40SB

The AirTAC SDAJ20X65-40SB is a compact double-acting double-rod cylinder built for applications requiring exact extend positioning. An external M6x1.0 adjuster screw lets you dial the forward stop anywhere between 25 and 65 mm directly on the machine.

This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M6x1.0 piston rod thread (-B). The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-40SB Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-40SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke65 mm
Adjustable range25 – 65 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-40SB

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×65Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-40SB Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 25 to 65 mm during machine setup to accommodate different part heights without fabricating new spacers.

science

Prototype Positioning

Use the 40 mm adjustment window to test multiple extend endpoints during R&D trials, locking the M6x1.0 screw once the optimal position is found.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-40SB the Right Cylinder?

Choose this specific model if your fixture requires frequent on-machine stroke tuning across a 40 mm window.

Confirm the 65 mm maximum stroke, 40 mm adjustability window, M5x0.8 port, male M6x1.0 rod thread, and the integrated magnet. Note that a plain cylinder does not hold position or load when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-40SB FAQ

The external M6x1.0 screw shortens the extend stop by up to 40 mm, yielding a usable 25 to 65 mm range without changing the force. The included -S magnet allows tracking by AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-40SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X65-40SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.