verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-50B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-50B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 15 to 65 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke65 mm
  • Adjustable range15–65 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$37.19 $44.69Save 16% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-50B

The AirTAC SDAJ20X65-50B is a compact double-acting double-rod cylinder featuring an external extend stop. A front M6x1.0 adjustment screw lets you dial the outward stroke anywhere between 15 and 65 mm directly on the machine, eliminating the need for shims or part swaps.

This unit utilizes a short riveted body to minimize axial mounting depth where a larger profile cylinder will not fit. It includes a male M6x1.0 threaded rod end for direct mounting and relies on a fixed NBR bumper at each end to decelerate the stroke. Note that this specific SKU lacks a piston magnet and therefore cannot support reed or electronic switches.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-50B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-50B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke65 mm
Adjustable range15 – 65 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-50B

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×65Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-50B Is Used

conveyor_belt

Changeover Pushers

Rapidly retune the outward stroke on a packaging line when switching box sizes, relying on the fixed NBR bumper to absorb the 157.1 N end impact.

view_module

Compact Diverter Gates

Fit the short riveted body into tight transfer stations and set the male M6 rod extension precisely to deflect products without changing hardware.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-50B the Right Cylinder?

When sizing this 20 mm bore actuator, evaluate your force requirements against its neighbors.

Choose this specific configuration if your application requires frequent on-machine stroke tuning across a 15 to 65 mm window. Confirm your setup needs the male M6x1.0 rod thread and the M5x0.8 port. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 15–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-50B FAQ

At 0.7 MPa the push increases to 219.9 N and the pull to 184.7 N. The theoretical maximum push is 32 kgf at 1.0 MPa.

Turning the R (M6x1.0) screw shortens the extend end position by up to 50 mm, allowing you to set the outward stroke anywhere between 15 and 65 mm. The retract remains full and the adjustment does not alter the output force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-50B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X65-50B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.