verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-75S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-75S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 65 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke65 mm
  • Adjustable range0–65 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$43.49 $50.99Save 14% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-75S

The AirTAC SDAJ20X65-75S is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop anywhere from 0 to 65 mm on-site. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit.

This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-75S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-75S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke65 mm
Adjustable range0 – 65 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-75S

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×65Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-75S Is Used

precision_manufacturing

Prototype Dialing

Dial the extend stop from 0 to 65 mm during prototype runs to find the exact 94 N safe working contact point without machining new spacers.

science

Lab Test Actuation

Set precise trial positions up to 65 mm for repetitive testing, relying on the fixed NBR bumper to absorb end-of-stroke shock quietly.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-75S the Right Cylinder?

Choose this specific model when your fixture requires frequent on-machine stroke tuning without part swaps.

Confirm the 65 mm maximum stroke, 75 mm adjustment window, M5x0.8 port, and female M4x0.7 rod-end thread suit your mounting envelope. The -S magnet enables position sensing, but note that a plain cylinder does not hold a load on air loss; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-75S FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

The M6x1.0 R screw shortens the extend stop by up to 75 mm, allowing a usable extend range of 0 to 65 mm without changing force. The built-in -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X65-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.