
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-10S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X70-10S is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M6x1.0 adjuster screw lets you dial the forward stroke anywhere between 60 and 70 mm without swapping shims or parts.
The short riveted body minimizes axial mounting depth, fitting where round-body or profile cylinders cannot. End-of-travel shock is handled by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion. Equipped with a built-in piston magnet, this unit supports AirTAC reed or electronic solid-state switches for position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 60-70 mm extend stop during initial fixture setup to prevent over-travel on delicate machining contacts.
Fine-tune the pusher stroke on the fly for varying package sizes without changing out the entire actuator assembly.
Safely apply up to 157.1 N of clamping force at 0.5 MPa while making incremental 1 mm adjustments to the end position.
It is tailored for operators needing precise 60-70 mm forward positioning during machine commissioning.
Remember that a plain compact cylinder does not hold position if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, install an external rod lock or pilot-operated check valve. This configuration includes a 20 mm bore, 70 mm max stroke, 10 mm adjust window, M5x0.8 port, female M4x0.7 rod thread, and the S magnet option.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 R screw shortens the extend stop by up to 10 mm, giving a usable 60-70 mm forward range. The S option includes a built-in piston magnet compatible with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.