verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke70 mm
  • Adjustable range50–70 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$38.37 $45.87Save 16% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20B

The AirTAC SDAJ20X70-20B is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that saves mounting depth where round-body alternatives will not fit. An external M6x1.0 adjuster screw lets you dial the extend stop down by up to 20 mm, yielding a precise 50-70 mm working range directly on the machine without swapping parts.

This specific SKU includes a male M6x1.0 threaded rod end and lacks a piston magnet, meaning it cannot host reed or electronic switches without changing to an -S variant. End-of-travel deceleration relies on a fixed NBR bumper, not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke70 mm
Adjustable range50 – 70 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20B

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×70Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20B Is Used

precision_manufacturing

Short-Stroke Clamping

Dial the extend stop from 70 mm down to 50 mm to clamp variable-height castings without machining custom spacers.

sync_alt

Changeover Dials

Turn the M6x1.0 adjuster to shift the rod end position during product family changeovers, cutting setup time on high-mix lines.

science

Trial Positioning

Use the 20 mm window to probe for the exact extend length during prototyping, locking the mechanical stop once the optimal reach is found.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20B the Right Cylinder?

Choose this unit if your fixture requires on-site stroke tuning between 50 and 70 mm.

Confirm the bore, 70 mm maximum stroke, 20 mm adjustment window, and M5x0.8 air port suit your manifold. The male M6x1.0 piston rod (-B) must match your tooling interface, and because this SKU lacks the -S magnet, position sensing is unavailable. Note that a plain cylinder does not hold position or load upon air loss or valve centering; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 50–70 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20B FAQ

The screw is a stop, not a lock; the cylinder will drift on air loss, so use an external rod lock for load holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-20B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X70-20B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.